FANDOM


Corrosive Glue is the Glue Gunner's tier 3 upgrade in Bloons Tower Defense 4, the second upgrade on the first path in Bloons Tower Defense 5, and the 2nd upgrade of Path 1 for in BTD6.

Bloons Tower Defense 4Edit

Corrosive Glue is an upgrade for the Glue Gunner in BTD4. It is the third upgrade of the Glue Gunner. It allows the Glue Gunner to deal 1 damage to bloons per 2 seconds. It costs $255 on Easy, $300 on Medium, and $325 on Hard.

DescriptionEdit

(insert description of what tower does)

(insert visuals of tower)


Bloons Tower Defense 5Edit

Corrosive Glue is an upgrade for the Glue Gunner in BTD5. In BTD5, it is the 2nd upgrade of Path 1. It allows the Glue Gunner to deal 1 damage per 2 seconds. It costs $255 on Easy, $300 on Medium, $325 on Hard, and $360 on Impoppable.

It allows the Glue Gunner to shoot corrosive glue that pops one layer of a bloon every two seconds. Corrosive Glue can pop Lead Bloons and Ceramic Bloons, although it still does not slow down Ceramic Bloons except on mobile.

DescriptionEdit

(insert description of what tower does)

(insert visuals of tower)

TipsEdit

  • TBA

StrategyEdit

TBA


Bloons Tower Defense 6Edit

Corrosive Glue returns as the 2nd upgrade of Path 1 for the Glue Gunner in BTD6. It allows the Glue Gunner to deal damage to bloons over time while glued, but now glue corrodes per 2.3s, which in total corrodes up to 4 layers (10 with Stickier Glue). Unlike BTD5, most upgrades of the Glue Gunner can now target MOAB-class, provided they have Corrosive Glue or special upgrades such as MOAB Glue. It costs $255 on Easy, $300 on Medium, $325 on Hard, and $360 on Impoppable.

DescriptionEdit

Corrosive Glue will take effect after 2.3 seconds. When it does, it applies 1 layer of damage to the affected bloons. Due to the previous upgrade, this will persist even if the current layer is popped. The base glue will last long enough to apply 4 layers of damage, unless an upgrade such as Stickier Glue is bought alongside Corrosive Glue.

The Glue Gunner gains a purple protective suit and green goggles. When combined with other tier 2 crosspaths, half of the suit will be purple and the other half will be the other path's respective color. When applied as a secondary crosspath for tier 3 and 4 upgrades, their respective suits gain a thin, purple, vertical stripe on the middle of their headgear.

TipsEdit

  • This is useful for helping deal with large waves of lower-tier bloons, as while dealing damage slowly, the widespread effect can help whittle down clumps. Its particularly good at dealing with clumps of Pinks and Purples.
  • Its also useful for dealing with Leads, and is one of the cheaper upgrades able to do so.
  • It is very effective when used with Glue Strike or Glue Storm , as the sheer number of bloons being glued will cause it to do fairly massive damage, which can help prevent your other towers from being overwhelmed.
  • This upgrade is actually usually seen as a downgrade in the later rounds. This is primarily because of the added effect of now affecting MOAB class bloons. Because it deals almost no damage to them and doesn't slow or soak through, it ends up wasting time and pierce gluing them, possibly letting bloons sneak through. Another issue is it can take priority over other glues, such as a MOAB Glue. Don't buy this upgrade if planning to use other glue gunners in tandem. Should almost always be ignored in C.H.I.M.P.S. as it will end up causing issues in the late game unless using a 2-0-4 glue.
  • Another issue with the upgrade is it can easily lead to regrow farms. Comboing with a Grow Blocker can help alleviate this problem to an extent

StrategyEdit

TBA

GalleryEdit

TriviaEdit

BTD4-BTD5Edit

  • In Bloons Tower Defense 4, if a player upgrade a Glue Gunner to Corrosive Glue during a round, all of the bloons that the Glue Gunner already glued in that round will corrode.
  • Sometimes in BTD4 Corrosive Glue will not pop bloons when Fast Forward is activated.
  • The artwork of the Glue Gunner with Corrosive Glue in Bloons Tower Defense 5 has green glue dripping from his gun even though he shoots yellow glue, however the Bloon Liquefier shows yellow glue even though it shoots green glue.
  • This is the only upgrade for the Glue Gunner in Bloons TD 5 that has yellow corrosive glue.
  • Corrosive Glue pops slightly faster than the speed of which Regrowth Bloons regenerate at. This makes it effective for Regen Farming.
  • This can destroy a Rainbow Bloon on any beginner track with Stickier Glue, and a Ceramic Bloon on any beginner track in Bloons TD 4 iOS.
    • The reason is that in Bloons TD 4 iOS when popping a Ceramic Bloon with corrosion, all 10 layers of the shell count as 1 layer. It is unknown if it is a glitch or not.

BTD6Edit

Start a Discussion Discussions about Corrosive Glue

Community content is available under CC-BY-SA unless otherwise noted.